- Hamburg, Germany (A320 series)
- Seville, Spain (A400M)
- Tianjin, China (A320 series).
- Toulouse, France (A330, A340, A380)
 |
| Airbus |
Airbus SAS is an aircraft manufacturing subsidiary of EADS, a European aerospace company. Based in Blagnac, France, near Toulouse, and with significant activity across Europe, the company produces around half of the world's jet airliners.
Airbus began as a consortium of aerospace manufacturers. Consolidation of European defence and aerospace companies around the turn of the 21st century allowed the establishment of a simplified joint-stock company in 2001, owned by EADS (80%) and BAE Systems (20%). After a protracted sales process BAE sold its shareholding to EADS on 13 October 2006.
Airbus employs around 52,000 people at sixteen sites in four European Union countries: Germany, France, the United Kingdom and Spain. Final assembly production is at Toulouse (France), Hamburg (Germany), Seville (Spain) and, since 2009, Tianjin (People's Republic of China). Airbus has subsidiaries in the United States, Japan, China and India.
The company is known for producing and marketing the first commercially viable fly-by-wire airliner, the Airbus A320, and the world's largest airliner, the A380.
Airbus Industrie was formally established as a Groupement d'Interet Économique (Economic Interest Group or GIE) on 18 December 1970. It had been formed by a government initiative between France, Germany and the UK that originated in 1967. The name "Airbus" was taken from a non-proprietary term used by the airline industry in the 1960s to refer to a commercial aircraft of a certain size and range, for this term was acceptable to the French linguistically. Aérospatiale and Deutsche Airbus each took a 36.5% share of production work, Hawker Siddeley 20% and Fokker-VFW 7%. Each company would deliver its sections as fully equipped, ready-to-fly items. In October 1971 the Spanish company CASA acquired a 4.2% share of Airbus Industrie, with Aérospatiale and Deutsche Airbus reducing their stakes to 47.9%. In January 1979 British Aerospace, which had absorbed Hawker Siddeley in 1977, acquired a 20% share of Airbus Industrie. The majority shareholders reduced their shares to 37.9%, while CASA retained its 4.2%.
The Airbus A300 was to be the first aircraft to be developed, manufactured and marketed by Airbus. By early 1967 the "A300" label began to be applied to a proposed 320 seat, twin engined airliner. Following the 1967 tri-government agreement, Roger Béteille was appointed technical director of the A300 development project. Béteille developed a division of labour which would be the basis of Airbus' production for years to come: France would manufacture the cockpit, flight control and the lower centre section of the fuselage; Hawker Siddeley, whose Trident technology had impressed him, was to manufacture the wings; Germany should make the forward and rear fuselage sections, as well as the upper centre section; The Dutch would make the flaps and spoilers; finally Spain (yet to become a full partner) would make the horizontal tailplane. On 26 September 1967 the German, French and British governments signed a Memorandum of Understanding in London which allowed continued development studies. This also confirmed Sud Aviation as the "lead company", that France and the UK would each have a 37.5% workshare with Germany taking 25%, and that Rolls-Royce would manufacture the engines.
In 1972, the A300 made its maiden flight and the first production model, the A300B2 entered service in 1974; though the launch of the A300 was overshadowed by the similarly timed supersonic aircraft Concorde. Initially the success of the consortium was poor, but orders for the aircraft picked up, due in part to the marketing skills used by Airbus CEO Bernard Lathière, targeting airlines in America and Asia. By 1979 the consortium had 256 orders for A300, and Airbus had launched a more advanced aircraft, the A310, in the previous year. It was the launch of the A320 in 1981 that guaranteed the status of Airbus as a major player in the aircraft market – the aircraft had over 400 orders before it first flew, compared to 15 for the A300 in 1972.
The retention of production and engineering assets by the partner companies in effect made Airbus Industrie a sales and marketing company. This arrangement led to inefficiencies due to the inherent conflicts of interest that the four partner companies faced; they were both GIE shareholders of, and subcontractors to, the consortium. The companies collaborated on development of the Airbus range, but guarded the financial details of their own production activities and sought to maximise the transfer prices of their sub-assemblies. It was becoming clear that Airbus was no longer a temporary collaboration to produce a single plane as per its original mission statement, it had become a long term brand for the development of further aircraft. By the late 1980s work had begun on a pair of new medium-sized aircraft, the biggest to be produced at this point under the Airbus name, the Airbus A330 and the Airbus A340.
In mid-1988 a group of Airbus engineers led by Jean Roeder began working in secret on the development of an ultra-high-capacity airliner (UHCA), both to complete its own range of products and to break the dominance that Boeing had enjoyed in this market segment since the early 1970s with its 747. The project was announced at the 1990 Farnborough Air Show, with the stated goal of 15% lower operating costs than the 747-400. Airbus organised four teams of designers, one from each of its partners (Aérospatiale, DaimlerChrysler Aerospace, British Aerospace, CASA) to propose new technologies for its future aircraft designs. In June 1994 Airbus began developing its own very large airliner, then designated as A3XX. Airbus considered several designs, including an odd side-by-side combination of two fuselages from the Airbus A340, which was Airbus's largest jet at the time. Airbus refined its design, targeting a 15 to 20 percent reduction in operating costs over the existing Boeing 747–400. The A3XX design converged on a double-decker layout that provided more passenger volume than a traditional single-deck design.
Five A380s were built for testing and demonstration purposes. The first A380 was unveiled at a ceremony in Toulouse on 18 January 2005, and its maiden flight took place on 27 April 2005. After successfully landing three hours and 54 minutes later, chief test pilot Jacques Rosay said flying the A380 had been "like handling a bicycle". On 1 December 2005, the A380 achieved its maximum design speed of Mach 0.96. On 10 January 2006, the A380 made its first transatlantic flight to Medellín in Colombia.
The first aircraft delivered was to Singapore Airlines on 15 October 2007 and entered service on 25 October 2007 with an inaugural flight between Singapore and Sydney. Two months later Singapore Airlines CEO Chew Choong Seng said that the A380 was performing better than both the airline and Airbus had anticipated, burning 20% less fuel per passenger than the airline's existing 747-400 fleet. Emirates was the second airline to take delivery of the A380 on 28 July 2008 and started flights between Dubai and New York on 1 August 2008. Qantas followed on 19 September 2008, starting flights between Melbourne and Los Angeles on 20 October 2008.
The Airbus product line started with the A300, the world's first twin-aisle, twin-engined aircraft. A shorter, re-winged, re-engined variant of the A300 is known as the A310. Building on its success, Airbus launched the A320 with its innovative fly-by-wire control system. The A320 has been, and continues to be, a great commercial success. The A318 and A319 are shorter derivatives with some of the latter under construction for the corporate biz-jet market (Airbus Corporate Jet). A stretched version is known as the A321 and is proving competitive with later models of the Boeing 737.
The longer-range widebody products, the twin-jet A330 and the four-engine A340, have efficient wings, enhanced by winglets. The Airbus A340-500 has an operating range of 16,700 kilometres (9,000 nmi), the second longest range of any commercial jet after the Boeing 777-200LR (range of 17,446 km or 9,420 nautical miles). The company is particularly proud of its use of fly-by-wire technologies and the common cockpit systems in use throughout the aircraft family, which make it much easier to train crew.
Airbus is studying a replacement for the A320 series, tentatively dubbed NSR, for "New Short-Range aircraft". Those studies indicated a maximum fuel efficiency gain of 9–10% for the NSR. Airbus however opted to enhance the existing A320 design using new winglets and working on aerodynamical improvements. This "A320 Enhanced" should have a fuel efficiency improvement of around 4–5%, shifting the launch of a A320 replacement to 2017–2018.
In 24 September 2009 the COO Fabrice Bregier stated to Le Figaro that the company would need from €800 million to €1 billion over six years to develop the new aircraft generation and preserve the company technological lead from new competitors like C919, scheduled to operate by 2015–2020.
In July 2007, Airbus delivered its last A300 to FedEx, marking the end of the A300/A310 production line. Airbus intends to relocate Toulouse A320 final assembly activity to Hamburg, and A350/A380 production in the opposite direction as part of its Power8 organisation plan begun under ex-CEO Christian Streiff.
Airbus supplied replacement parts and service for Concorde until its retirement in 2003.
In 2005, Airbus, together with air transport IT and telecoms provider SITA, launched OnAir to provide inflight mobile phone services for passengers. The concept was to enable passengers to use their mobile devices during flights. Despite being part-owned by Airbus, OnAir's services are also available on Boeing aircraft, as well as a number of private jets (including Airbus Corporate Jets A320). Airbus' role in OnAir, aside from being one of the major shareholders, is to help drive sales, develop and maintain efficient low cost avionics, and integrate the airborne equipment.
Airbus has several final assembly lines for different models and markets. These are:
Airbus, however, has a number of other plants in different European locations, reflecting its foundation as a consortium. An original solution to the problem of moving aircraft parts between the different factories and the assembly plants is the use of "Beluga" specially enlarged jets, capable of carrying entire sections of fuselage of Airbus aircraft. This solution has also been investigated by Boeing, who retrofitted 3 of their 747 aircraft to transport the components of the 787. An exception to this scheme is the A380, whose fuselage and wings are too large for sections to be carried by the Beluga. Large A380 parts are brought by ship to Bordeaux, and then transported to the Toulouse assembly plant by the Itinéraire à Grand Gabarit, a specially enlarged waterway and road route.
North America is an important region to Airbus in terms of both aircraft sales and suppliers. 2,000 of the total of approximately 5,300 Airbus jetliners sold by Airbus around the world, representing every aircraft in its product line from the 107-seat A318 to the 565-passenger A380, are ordered by North American customers. According to Airbus, US contractors, supporting an estimated 120,000 jobs, earned an estimated $5.5 billion (2003) worth of business. For example, one version of the A380 has 51% American content in terms of work share value. A plant will be built in Mobile, Alabama for KC-45A, A330-200MRTT and A330-200F production.
Airbus opened an assembly plant in Tianjin, People's Republic of China for its A320 series airliners in 2009. Airbus started constructing a $350 million component manufacturing plant in Harbin, China in July 2009, which will employ 1,000 people. Scheduled to be operated by the end of 2010, the 30,000 square meter plant will manufacture composite parts and assemble composite work-packages for the A350 XWB, A320 families and future Airbus programs. Harbin Aircraft Industry Group Corporation, Hafei Aviation Industry Company Ltd, AviChina Industry & Technology Company and other Chinese partners hold the 80 percent stake of the plant while Airbus control the remaining 20 percent.
Airbus has joined Honeywell and JetBlue Airways in an effort to reduce pollution and dependence on oil. They are trying to develop a biofuel that could be used by 2030. The companies think they can almost cover one third of the world's airplane fuel need. A plan to create a biofuel that won’t affect food resources is the proposal. Algae is a possible alternative because it absorbs carbon dioxide, and it will not affect food production. However, algae and other vegetation are still just experiments, and algae is expensive to develop. Airbus recently had the first alternative fuel flight. It ran on 60 percent kerosene and 40 percent gas to liquids (GTL) fuel in one engine. It did not cut carbon emissions, but it was free of sulphur emissions. Alternative fuel was able to work properly in Airbus's aeroplane engine, so alternative fuels should not cause a need for new aeroplane engines. This flight and the company's long term efforts are considered big strides towards environmentally friendly aeroplanes.
Visit Sotokan for Daily Updated Hairstyles Collection
No comments:
Post a Comment